China Top 10 Phone Screen Factory 

How to put a screensaver on the phone? Mobile phone film tutorial

by:YoukingTech     2021-08-23
Posted on 10.25 Whenever a new machine starts, people will add a protective film to its screen, but they don’t know how to stick the film. The protective film will usually be pasted by the seller of the film. However, once the protective film is found to be crooked or worn out and needs to be replaced in the future, it is quite troublesome to go to the merchant to do it again. In fact, filming is not a 'difficult task'. As long as you choose high-quality protective film products and have a clear understanding of the filming process, it is really not difficult to do it yourself. Now I will teach you how to post. Method/step Clean the screen. Use BG cloth (or soft fiber cloth or glasses cloth) to wipe the screen to clean the phone screen thoroughly. It is best to wipe the screen in a clean and tidy indoor environment to reduce the impact of dust on the film. Because it is necessary to thoroughly clean the film before sticking, if you accidentally get dust on it, it will directly affect the result of the film, at least it will cause bubbles after the film, and at worst, the film will fail. 1 Get the initial impression of the film. Take the protective film out of the packaging, do not tear the release film, put it directly on the phone screen to get a preliminary impression of the film, especially observe the adhesion of the edge of the film and the phone screen, and have a rough idea of u200bu200bthe position of the film This will help the subsequent filming procedures. 2 Tear a part of the release film ①. Observe the label on the protective film, tear off a part of the release film marked '①Each protective film product is divided into three layers, of which ① and ② are release films, which are used to protect the middle protective film. 3 Slowly stick the protective film to the screen. Align the adsorption layer of the protective film with the corners of the screen, make sure that the position is aligned, and then attach it carefully. While pasting, tear off the release film No. ①. If bubbles are generated during the pasting process, you can pull the film back and re-attach it. After confirming that the film position is completely correct, completely tear off the release film ①. 4 After the entire protective film is attached to the screen, if you find that there are still bubbles, you can use the BG scratch card to scratch the screen once and then to exhaust the air. 5 Completely tear the release film ② to complete the film. Tear the release film ② completely, and wipe the screen with a cloth, the whole filming process is declared complete. 6
Custom message
Chat Online
Chat Online
Chat Online inputting...
Sign in with: